Urenkoff logo

Products

LedgerMatch
3DS AuthControl
SecurityPricingAbout usLog in
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Eng

Eng
Esp
Book a DemoCreate an Account
Products
LedgerMatch
3DS AuthControl
SecurityPricingAbout usLog in

Eng

Eng
Esp
Book a DemoCreate an Account
gradient blur mask
gradient blur mask
gradient blur mask
gradient blur mask
gradient blur mask
gradient blur mask
gradient blur mask
gradient blur mask
gradient blur mask
gradient blur mask
gradient blur mask
gradient blur mask
gradient blur mask

LedgerMatch vs FloQast: Transaction Matching or Close Management

General

Last Updated:

November 2026
5

mins read

FloQast organises the people and tasks of the close. LedgerMatch checks that the money arrived. Both are useful, and most teams only need one of them first.

Both of these products will tell you they automate reconciliation, and both are telling the truth. They are solving it from opposite ends. One starts from the close and works back to the transactions. The other starts from the money and stops before the close begins.

This article compares two pieces of reconciliation software and sets out what each one does, where they genuinely overlap, and the questions that usually decide it. Everything described here about FloQast comes from FloQast's own published product material, which is linked at the end so you can check any of it yourself.

The difference in one line

LedgerMatch, the reconciliation software built by Urenkoff, is a matching product. It concentrates on money coming in: payments, card settlements and deposits, checked against what actually arrived in the bank, with the exceptions passed to a person. It does not manage your close and it does not post to your ledger.

FloQast is a close management platform. It organises the month-end close, with reconciliations, matching, journals and compliance work managed inside it, and it posts adjusting journals back to your ERP. Its own description is "designed by accountants for accountants", which tells you precisely who it is built around.

CriteriaLedgerMatchFloQast
Built to solvePayment volume and the exceptions it createsRunning and controlling the month-end close
Sits withYour bank and payment dataYour ERP, your close checklist and your accounting team
Leaves you withA confirmed figure and an evidence trailA closed, certified and documented period

Neither description is a criticism of the other. A close platform is supposed to run the close. A matching product is supposed to match. The question is which half of the problem is costing you more right now.

What LedgerMatch does

LedgerMatch, Urenkoff's reconciliation software, is built around one question: did the money you were owed actually arrive, and if some of it did not, which payments and why. It reads what your systems say you should have received and what the bank actually received, matches the two, and sends a person only the items that do not reconcile.

CriteriaLedgerMatch
Best forHigh-volume incoming payments checked against the bank
What it reconcilesPayments, card settlements and deposits against your own records
Connects toBanks and payment processors, including 12,000+ US banks, and accounting ledgers
MatchingRules you set on amount, date and reference, with AI for the cases rules miss
Published automation figureUp to 95% of payments matched automatically
HandlesFees, rounding and timing gaps inside the match, plus multiple currencies
Posts to your ERPNo, results are reported back to you
Close managementNot included, your close process stays where it is
Getting startedConnect in minutes, nothing configured by hand, no long rollout
PricingPublished: free tier, $199, $599, from $1,999 per month, 14 day trial without a card

The part that matters most to a finance team is how differences are handled. Fees, rounding and settlement timing are applied during matching rather than left as variances for somebody to investigate, so what reaches a person is genuinely unexplained. Ambiguous items are deliberately left unmatched rather than force-matched, because a wrong match costs more later than an open one does now.

It is also deliberately narrow. LedgerMatch does not run your close, does not manage a checklist, does not certify accounts and does not write to your ERP. It produces a checked figure and the evidence behind it, and your existing process takes it from there.

Is LedgerMatch right for you?

  • ✓ Choose it if the money side is what hurts: payments, settlements and deposits arriving faster than anyone can tie them out.
  • ✕ Skip it if what you actually need is the close itself organised, certified and documented.

What backs that up

  • ✓ Coverage: direct read-only connections to more than 12,000 US banks, plus card processors and accounting ledgers.
  • ✓ Scope of the match: fees, rounding, timing differences and multiple currencies handled inside the match rather than left as variances.
  • ✓ Transparency: prices published openly, from a free proof-of-concept tier upward, with a 14 day trial that needs no card.
  • ✓ Proof before commitment: it can be run against a period you have already closed, so you compare its answer with yours.

What FloQast does

FloQast starts where the accountant starts: the close checklist. Its subject is the whole month-end process, with reconciliations, matching, journals and compliance work managed in one place and tied back to the ERP. Matching is one capability inside that, rather than the product itself.

CriteriaFloQast
Best forRunning, controlling and shortening the month-end close
What it reconcilesGeneral ledger against bank and credit card activity, subledgers, accruals, and three-way matches across up to three data sources
Connects toERP systems including NetSuite, Sage Intacct, Microsoft, SAP, Xero and Workday, plus banks, credit cards, AP and payroll tools
MatchingRules written in natural language, exception routing, three-way matching, an audit trail of matching activity
Published automation figureAI rules reconcile up to 98% of transactions instantly, every period
HandlesRollforward schedules, auto-certification of low-risk reconciliations within thresholds, flux analysis, compliance work
Posts to your ERPYes, it can generate, validate, approve and post adjusting journals directly
Close managementThe core of the product
Getting startedDescribed as working without heavy admin or IT lift, with no-code AI agents and a deployment team
PricingNot published, quoted on request

Two things in that table deserve underlining, because they are the real difference. FloQast posts adjusting journals directly to your ERP, which closes the loop between matching and accounting. And it carries the apparatus of a close: rollforward schedules, auto-certification within thresholds, and the checklist that tells a team what is done and what is not. FloQast states it is trusted by more than 3,500 global companies.

It is also honest about its audience. "Designed by accountants for accountants" is not marketing filler, it is an accurate description of the product's shape. The workflow assumes a controller, an accounting manager and a close calendar.

Is FloQast right for you?

  • ✓ Choose it if the close is the thing you want to run better, with reconciliations, journals and certification managed together and posted to your ERP.
  • ✕ Skip it if your close already works and the only painful part is matching the payments that feed it.

What backs that up

  • ✓ Breadth: close management, matching, automated reconciliations, journals, flux analysis and compliance in one platform.
  • ✓ ERP integration: named integrations with NetSuite, Sage Intacct, Microsoft, SAP, Xero and Workday, with journals posted back.
  • ✓ Automation: AI rules that FloQast says reconcile up to 98% of transactions instantly, with rules written in natural language.
  • ✓ Adoption: FloQast states it is trusted by more than 3,500 global companies.

Where the two genuinely overlap

This is a closer comparison than it first looks, and it is worth being straight about that. Both products:

  • Automate transaction matching at high volume
  • Match bank and card activity against your own records
  • Let you configure matching rules rather than accept fixed logic
  • Route exceptions to a person instead of making someone review everything
  • Keep an audit trail behind matched items
  • Publish an upper-bound automation figure

A word about those two figures. FloQast states that AI rules reconcile up to 98% of transactions. LedgerMatch states that up to 95% of payments are matched automatically. Those numbers are not measured on the same population. One covers transactions inside a close process across general ledger and subledger data, the other covers incoming payments matched against bank credits. Reading them as a league table would be a mistake, and we would say the same if the numbers ran the other way. The useful question is not whose figure is higher on a website, but what the unmatched remainder looks like in your own data, which only a test on your own period will answer.

The differences that decide it

1. Where the product starts. FloQast starts at the close checklist and works down to the transactions. LedgerMatch starts at the bank and stops once the money is confirmed. That single difference explains most of the others.

2. What sits on the other side of the match. LedgerMatch matches payments to money that landed in the account. FloQast matches ledger and subledger activity to bank and card data as part of closing those accounts.

3. Whether anything is written back. FloQast can generate, validate, approve and post adjusting journals directly to your ERP. LedgerMatch posts nothing anywhere. One closes the loop into accounting, the other hands you an answer and leaves your systems untouched.

4. Whether you need an ERP. FloQast's value is tied to the systems it integrates with, and its named integrations are ERP platforms. LedgerMatch reads banks and processors directly and does not assume an ERP sits underneath.

5. Who the product is shaped around. FloQast is designed for accountants running a close calendar. LedgerMatch is shaped around whoever is responsible for money arriving correctly, which in a retailer, a marketplace or an ecommerce business is often not the controller at all.

6. How buying works. LedgerMatch publishes its prices and offers a free tier and a trial. FloQast does not publish prices and directs buyers to request a quote, which is normal for platform software sold to accounting teams and means the process starts with a conversation.

Which difference matters to you

If this is your situationThe deciding factor is
Payments arrive faster than anyone can tie them outWhere the product starts
You want matched results turned into journals automaticallyWhether anything is written back
You are standardising a close across a growing teamClose management
You do not run a traditional ERPWhat it connects to
You need to try before a sales conversationHow buying works

Side by side

CriteriaLedgerMatchFloQast
Primary jobConfirming money coming in against the bankRunning and controlling the month-end close
Transaction matchingThe whole productOne capability within the platform
Also coversException handling, variance reporting, API outputClose checklist, automated reconciliations, journals, flux analysis, compliance
Typical sourcesBanks, card processors, accounting ledgers, 12,000+ US banksERP systems, banks, credit cards, AP and payroll tools
Posts to the ERPNoYes, adjusting journals can be posted directly
CertificationRecords who reconciled and who approvedAuto-certification of low-risk reconciliations within thresholds
Published automation figureUp to 95% of payments matched automaticallyUp to 98% of transactions reconciled by AI rules
Shaped aroundTeams responsible for incoming paymentsAccountants running a close calendar
Getting startedConnect an account in minutes, free tier and trial availableNo-code setup with a deployment team, described as without heavy IT lift
PricingPublished, from free to $1,999+ per monthNot published, quoted on request

Every row is drawn from the two companies' own published material. Neither column is a scorecard, and several rows that look like a gap are simply a description of what that product is for.

They are not mutually exclusive

These two sit at different points in the same pipeline, which means some finance teams will genuinely want both. Confirming what arrived from your banks and processors happens before the close; organising, certifying and documenting that close happens after. A company running FloQast may still have an incoming payment problem it has not solved, and a company using LedgerMatch may later want its close managed properly.

If you are weighing them as alternatives, check first whether you are comparing two answers to the same question.

Five questions that will decide it for you

  1. What is slow right now? Matching the transactions, or running and documenting the close around them?
  2. What are you matching? Payments, settlements and bank credits, or ledger and subledger balances?
  3. Do you want journals posted automatically? If the answer is yes, that points firmly one way.
  4. Do you run an ERP the platform integrates with? If not, a close platform loses much of its advantage.
  5. Who will own this day to day? A controller closing the books, or a team responsible for money arriving correctly?
Your answerWhat it points to
The close write-up and sign-off are slowA close platform
Matching payments is slowA matching product
You want adjusting journals posted for youA close platform
You want a checked figure and nothing written backA matching product
An accountant owns it, inside a close calendarA close platform
Operations or finance ops owns the payment sideA matching product

What to ask on the call, whichever way you are leaning

The same five questions work on us and on anyone else you are evaluating, and the answers tell you more than a feature list.

  1. What exactly will this match, and what will still land on a person's desk?
  2. What does it connect to directly, and what will we have to upload ourselves?
  3. What does your published automation figure actually measure, and on what kind of data?
  4. What has to be decided internally before configuration can start?
  5. Can we run it against a period we have already closed, and compare both answers?

The third and fifth are the ones worth insisting on. An upper-bound percentage means very little until you know what it was measured on, and any vendor confident in its matching should be happy to be checked against a month you already know the answer to.

See it against your own numbers

The fastest way to settle any of this is to run a period you have already closed. Book a walkthrough and we will match a month your team has already reconciled, so you can compare what LedgerMatch says against the answer you reached yourself, before anything depends on it.

Igor Yurenkov
Igor Yurenkov is the founder of Urenkoff SA. He specialises in payments, software sales and information security for banks, payment processors and finance teams. A certified PCI DSS Internal Security Assessor (ISA) with more than 15 years in the industry, he has worked across the systems that process, secure and reconcile payments.
Igor Yurenkov es el fundador de Urenkoff SA. Se especializa en pagos, ventas de software y seguridad de la información para bancos, procesadores de pagos y equipos financieros. Es Evaluador de Seguridad Interna (ISA) certificado en PCI DSS y cuenta con más de 15 años de experiencia en el sector; ha trabajado en los sistemas que procesan, protegen y concilian los pagos.

Become a Design Partner

Reconcile faster. Stay audit-ready

We're accepting a limited number of organizations for the inaugural cohort. No cost, 12 months, direct access to our team.
Book a demo

May also interest you

Discover more
General
General
November 11, 2026

How to Audit a Bank Reconciliation

A bank reconciliation that balances proves almost nothing. This guide covers the full audit procedure, the manipulations it catches, and the red flags worth knowing.
General
General
November 11, 2026

How to Connect Your Business Bank Account for Automatic Reconciliation

Title Post for ES Version

Connecting your bank account directly is what makes daily reconciliation possible, instead of exporting a statement once a month. This guide covers what the connection actually gives a vendor, the six questions to ask before you authorise one, and how to test the result against a month you have already closed.
Post Summary for ES Version
General
General
November 11, 2026

How to Reconcile Accounts Receivable Without Forcing the Numbers

Accounts receivable reconciliation answers one question: does what customers owe you agree with the money that actually arrived. This guide covers the six-step process, the six differences that cause most of the work, and how to stop doing the matching by hand.
Urenkoff logo

In Money We Trust

© Urenkoff 2026

Main Pages

HomeSecurityPricingAbout UsContactFAQBlog

Banking Infrastructure Platform

LedgerMatch

Payment Infrastructure Platform

3DS AuthControl

Legal & Utilities

Privacy PolicyTerms of Service

© Urenkoff 2025